Wednesday, November 7, 2012

Motherboard Repair > Circuit Board Repair and Rework Guide

Outline
The information within these guides should be helpful to anyone who works with bare circuit boards and circuit board assemblies. These guides are packed with illustrations and videos and follow popular IPC standards. These guides will help you through the maze of challenges you face when working on modern, high density circuit boards. If your company complies with ISO-9000 or any demanding quality standard, you can refer to these guides as your on-line reference.

Guides in sections 1 through 6 detail the proper step-by-step techniques, tools and materials, and cautions needed to reliably repair and modify bare and assembled circuit boards.

Guides in sections 7 and 8 detail the proper step-by-step techniques, tools and materials, and cautions needed to reliably rework assembled circuit boards.

Each procedure includes a "Conformance Level" indicated as high, medium or low. This Conformance Level indicates how closely the repaired or reworked product will be to the original specifications. The Conformance Level listed for each procedure should be used as a guide only.

Each procedure also includes a "Skill Level" providing a gauge for the requisite experience and skill needed by the operator to obtain a reliable outcome. Skill Levels are listed as intermediate, advanced, or expert. The Skill Level recommended should be used as a guide only.

Hundreds of detailed illustrations, as shown on the right, are included throughout this guidebook. Visit the Foreword for more information on this guidebook and how it can be used at your company to reduce waste.
Images and Figures
Circuit Board Repair and Rework Guide
Section 2 covers procedures for coating removal and replacement.
Circuit Board Repair and Rework Guide
Section 3 covers procedures for base board repair.
Circuit Board Repair and Rework Guide
Section 4 covers procedures for conductor repair.
Circuit Board Repair and Rework Guide
Section 6 covers jumper wire procedures.
Circuit Board Repair and Rework Guide
Section 7 and 8 cover soldering and desoldering procedures.
Visit these sections more specific information.

1.0 Foreword
This section provides substantial background information about this guide and how it can be used at you company.

2.0 Basic Procedures
This section covers handling, cleaning, coatings, legend, and use of epoxies.

3.0 Base Board Procedures
This section covers repair of delamination, warp, key slots, non plated holes, surface defects, and various defects to base board material.

4.0 Conductor Procedures
This section covers repair and rework of conductors including circuits, lands, gold contacts, surface mount pads, and BGA pads.

5.0 Plated Hole Procedures
This section covers various methods for plated hole repair.

6.0 Jumper Wires and Component Modification Procedures
This section includes excellent procedures for adding jumper wires and performing various component modifications.

7.0 Soldering Procedures
This section includes procedures for soldering a variety of component types including chip components, J lead components and gull wing components.

8.0 Rework Procedures
This section includes procedures for removing a variety of component types including chip components, J lead components, and gull wing components.

9.0 BGA Rework Procedures
This section includes procedures for removing and replacing BGA components. 
Source Website: http://www.circuitrework.com

No comments:

Post a Comment